Introduction

Mobile Document Authenticator Regula 7310. User Manual

Contents

Application

Version: 2.7.7606.

How to perform an authenticity check and face comparison

  1. Download the application provided by Regula.

  2. Turn on NFC - it will be used for the RFID chip processing.

  3. Turn on Bluetooth - it will be used to connect the app to the device Regula 7310.

  4. Turn on the device: press and hold the gray button for a while on the left side of the device Regula 7310 until the red indicator starts blinking that is located on the right side of the device.

  5. Open the app. The initialization of the app starts. Wait for a while.

  6. Open Settings. If the app asks for permission to take pictures and record video, allow it.

  7. Open Authenticator.

  8. Enable the Use Authenticator option. If the app requests access to the device's location, allow it. It is required for pairing the authenticator with the app.

  9. Find your device in the list once it is updated and click on it. As soon as the device and the application are paired, you will see the tick next to the device name.

  10. If you have the finger scanner (it is shown on the image to the left of the device Regula 7310 at the top of the page) and you want also use it, open Finger scanner.

  11. Enable the Use finger print scanner option.

  12. Find your device in the list once it is updated and click on it. As soon as the device and the application are paired, you will see the tick next to the device name.

  13. Enable RFID chip reading (optional).

  14. Enable Face matching / Liveness if you need to perform face comparison / liveness check. Note: This option requires an Internet connection.

  15. Go back to the scenarios list.

  16. Launch the Authentication scenario. If the app requests access to the device's location, allow it. A green icon indicates that the device Regula 7310 is paired with the application.

  17. Point the camera at the document. Hold the device still until a UV flash appears. Then an IR flash will appear. Once the taken camera frames are processed, the RFID chip processing will be triggered and face comparison / liveness check will start if the corresponding options are enabled (see steps 13 and 14), otherwise, you will be redirected to the results page right after the camera frames are processed.

For more information, see FAQ.

FAQ

1) How to pair the device Regula 7310 with the application?

Solution:

2) How to pair the finger scanner with the application?

Solution: